Clean pavers, firm joints and better footing
Paver Cleaning and Joint Sand in Anastasia Island, FL
Get a free estimate to clean salt, sand and green growth off Anastasia Island pavers at (904) 274-8546.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who cleans pavers on Anastasia Island, and how soon will I hear back?
A local contractor cleans pavers all over Anastasia Island, FL, and you will hear back within 1 business day, often much sooner. Fresh joint sand can go in afterward, and the free estimate comes with no pressure to book. To start, call (904) 274-8546.
Cleaning lifts the salt film, sand, algae and rust marks that dull pavers near the ocean, so the surface looks brighter and feels steadier underfoot. Fresh sand then fills the gaps so the pavers lock together again. A side walk that has looked gray since spring can match the rest of the yard. Point out the spots that bother you most when you ask for a free estimate.
Paver Sealing Anastasia Island Is Proud to Serve Northeast Florida
What does paver cleaning on Anastasia Island include?
Three things happen on a cleaning visit: problem spots get treated, the surface gets a gentle wash and the joints get fresh sand once everything is dry. Book it alone, or let it lead into a coat of sealer. Shaded walks, pool decks and anything near a sprinkler head take the longest. To set up a visit, call (904) 274-8546.
Pretreatment
A paver-safe cleaner goes on mildew, leaf stains and rust first, so the wash does not have to rely on force.
Low pressure wash
A surface cleaner or wide spray keeps pressure at or under about 1,500 PSI so the joints keep their sand.
Joint sand
With the surface dry, polymeric sand is swept into each gap to hold the pavers tight.
Optional sealer
Adding a coat is your call. The sealing guide shows what it adds.
How do I know my island pavers need cleaning?
Look for green or black film in shady corners, sand spread over the surface after a storm, orange marks near sprinklers and weeds in the joints. Green growth is the one to deal with soonest, since it turns a walk or a pool deck slick. One side of a house can stay clean while another goes dark. To have yours looked at, call (904) 274-8546.
Is cleaning enough, or should I seal the pavers too?
A cleaning fixes how pavers look today, and sealer is about the next few years. If you only clean, algae, stains and fading return at their own pace. Unilock says a sealed surface is easier to sweep and wash, though the coat needs renewing every three to five years. Let the contractor know your preference when you ask for a free estimate.
How often should pavers on Anastasia Island be cleaned?
A St. Augustine paver company recommends a light cleaning once a year. Between visits, Nicolock, a paver maker, says routine rinsing helps with salt and sand in coastal areas, and the right pace depends on how close you are to the shoreline. To set a schedule, call (904) 274-8546.
Does higher pressure get pavers cleaner?
No, more pressure tends to damage pavers instead of cleaning them better. Western Interlock, a paver maker, says to keep pressure at or below about 1,500 PSI and the nozzle at least 6 inches from the surface, and warns that pressure washing can lift joint sand. Unilock suggests a fan nozzle held about 12 inches away at roughly a 30 degree angle. Ask what PSI and tip the contractor plans to use when you ask for a free estimate.
It also pays to ask where the runoff goes. Dune plants, garden beds and pool water all sit close to island homes. A contractor who answers those plainly is paying attention. To ask them yourself, call (904) 274-8546.
How long should pavers dry before sealing?
Unilock says pavers need at least 24 hours to dry after washing in cool or shaded spots, and a few hours in warm sun may do. Polymeric sand needs about 24 hours of its own, and a St. Augustine company allows 24 to 48 hours after sanding. Oak shade slows all of it. Find out how dryness gets confirmed when you ask for a free estimate.
Why are my pavers turning white?
A white chalky bloom on fairly new pavers is usually efflorescence. Nicolock says it forms when moisture moves through cement-based products, and Unilock says it usually fades in two to three months, though it can take up to a year. Sealing has to wait until it clears. Old sealer gone cloudy can look similar, so show the contractor the spot when you call (904) 274-8546.
Which surfaces around an island home can be cleaned?
Driveways, pool decks, patios and walkways can all be washed. Each collects its own kind of grime, so the cleaner and the method shift with the surface. To start with yours, ask for a free estimate.
Driveways
A driveway collects tire marks, oil drips and wind-blown sand. Cleaning the driveway keeps the joints full where the car turns every day.
Pool decks and lanai floors
Splash, sunscreen and bare feet all land on a pool deck. Cleaning a pool deck should leave it clean with grip that holds when wet.
Patios
A patio behind a beach house sees sand, salt mist and shade from the trees. Cleaning a patio starts with clearing the green film from the shaded corners.
Walkways and entries
The walk to the front door picks up sand, mulch and soil from the beds beside it. Cleaning that path is a small job, and it is the first thing a guest steps on.
What leaves pavers dirty on Anastasia Island?
Salt in the air, blowing sand, damp shade and rust from sprinklers lead the list here. A wash clears some of it, but sunken pavers and faded color need more than soap and water. To see where yours stand, call (904) 274-8546.
1. Salt in the air
Nicolock, a paver maker, says airborne salt can crystallize on a surface as moisture dries and may wear lower density pavers. Island homes sit close to the water, so the salt arrives every day.
2. Sand on top and gaps below
Beach sand blows across the surface while storms pull sand out of the joints. A St. Augustine paver company says nor'easters can empty paver joints, and Nicolock suggests checking joint sand from time to time.
3. Salt left in low yards
The same St. Augustine company says king tides can leave salt in the pores of low yards. St. Augustine Beach sits about 10 feet above sea level, so a low lot on the island is not hard to find.
4. Green film in damp shade
Live oak shade keeps surfaces damp, and that company says it invites mildew on north-side areas. A shaded walk or a lanai edge is where the green shows up first.
5. Rust marks from sprinklers
Sprinklers fed by a well can leave iron stains on pavers, the same company says. A wash with the right cleaner can lift them, and sealing should wait until they are gone.
What does paver cleaning cost on Anastasia Island?
Homewyse estimated paver cleaning at $0.30 to $0.55 per square foot in January 2026. At that rate a 600 square foot driveway runs about $180 to $330, and a 1,000 square foot pool deck about $300 to $550. Joint sand, rust treatment and repairs are often priced apart from the wash, so compare what each quote includes. For a price on your property, ask for a free estimate.
If you want sealer too, ask for both jobs in one quote. A St. Augustine paver company publishes $1.50 to $3.25 per square foot to clean and seal. Call (904) 274-8546 to compare the two prices.
Leaning toward a coat as well? The paver sealing guide explains it. Every covered town is listed on the service areas page, and the home page says more about paver sealing in Anastasia Island.
| Paved area | Cleaning only | Clean and seal |
|---|---|---|
| 300 sq ft | $90 to $165 | $450 to $975 |
| 600 sq ft | $180 to $330 | $900 to $1,950 |
| 1,000 sq ft | $300 to $550 | $1,500 to $3,250 |
Cleaning column uses the $0.30 to $0.55 per square foot Homewyse estimated in January 2026. Sealing column uses the $1.50 to $3.25 a St. Augustine paver company published as of November 2026. A real quote can come in above or below these numbers.
What does a contractor who works the island bring to paver cleaning?
A contractor who works the island knows what salt, sand and shade leave on pavers. Compare the quote with the rates above, and take as long as you like to answer. To begin, ask for a free estimate.
Contractors used to island conditions
A contractor who covers Anastasia Island has worked in the salt air, blowing sand and afternoon storms your pavers sit in. The plan for your job starts from that.
A free visit with no strings
The estimate costs nothing, and a no is an acceptable answer. You owe the contractor nothing until you sign.
Published prices to compare
Paver companies in St. Augustine post what they charge by the square foot. Hold any quote up against those figures before you agree.
Time to think it over
Nobody has to decide on the driveway. Ask for the price in writing, and read how to vet a paver contractor before you pick one.
Want a free paver cleaning estimate on Anastasia Island?
Call the number below or use the form, and a contractor replies within 1 business day, often much sooner.
Free, no obligation
Can I see cleaned pavers around Anastasia Island?
What does the paver cleaning process look like on a visit?
The paver cleaning process uses the first four steps below, and the fifth applies only if you add sealer. To set a date, call (904) 274-8546.
1. Measure and inspect
The contractor measures the area for the cleaning quote and checks for low spots, cracks, old sealer, rust marks and where water pools.
2. Protect and wash
Plants get covered and the irrigation timer goes off. The wash stays at or under about 1,500 PSI with the nozzle at least 6 inches away, the limits Western Interlock, a paver maker, gives.
3. Dry and sand the joints
Once the surface is dry, polymeric sand is swept into the gaps. A St. Augustine paver company allows 24 to 48 hours of drying after the sand goes in.
4. Seal in one session
Sealer goes on a dry surface with a pump sprayer, a foam roller or both, and a dry roller lifts the extra. Unilock says to do the whole area in one session so coats do not overlap.
5. Walk it with you
The contractor shows you the finished area and says when feet and cars can return. A St. Augustine paver company puts cars at 24 to 72 hours.
Frequently Asked Questions
Is it a good idea to pressure wash pavers?
Yes, if the wash is gentle and fresh sand goes back into the joints. Western Interlock, a paver maker, says to keep pressure at or below about 1,500 PSI and the nozzle at least 6 inches away, and warns that pressure washing can lift joint sand.
How much does it cost to clean pavers on Anastasia Island?
Homewyse estimated cleaning at $0.30 to $0.55 per square foot in January 2026. At that rate a 600 square foot driveway runs about $180 to $330. Joint sand, rust treatment and repairs are often priced apart, so ask what the number includes.
Can I use Dawn dish soap to clean my pavers?
Unilock describes a mild detergent mixed with water for light cleaning, but dish soap does not treat a stain that has set in. A St. Augustine paver company uses paver-safe cleaners for mildew, leaf stains and rust. Ask the contractor to name the cleaner and say what it does to nearby plants.
How much to clean and seal pavers?
A St. Augustine paver company publishes about $1.50 to $3.25 per square foot, and says most local jobs land between $500 and $3,000. For a 600 square foot driveway on Anastasia Island, that is about $900 to $1,950. Stripping failed old sealer raises it.
How often do you need to reseal pavers in Florida?
Unilock says every three to five years. A St. Augustine paver company says every two to three years near the Matanzas River or the bayfront and about every four elsewhere, with a light cleaning once a year in between.
How often should pavers near the beach be rinsed?
Nicolock, a paver maker, says routine rinsing helps with salt and sand buildup in coastal areas, and gives no fixed schedule. It says the right pace depends on how close the home is to the shoreline and how often storms come through.
Why do my pavers turn green in the shade on Anastasia Island?
Damp shade is what algae needs. A St. Augustine paver company says live oak shade keeps surfaces wet and invites mildew on north-side areas. Cleaning clears it, and sealing can make the surface easier to keep clean.
Should pavers be cleaned before sealing?
Yes. Sealer locks in whatever is on the surface, so algae, rust and old residue have to come off first. Unilock says pavers then need at least 24 hours to dry, and longer in cool shade.